Computer/motherboard |
RDR version used |
Status |
Tester at the VCFF |
Comments |
IBM 5150 16KB-64KB |
4.5 |
Works |
modem7 |
The 'Check ROM at F4000' test sometimes fails, because there is no ROM in IC socket U28. |
IBM 5150 64KB-256KB |
4.5 |
Works |
modem7 |
The 'Check ROM at F4000' test sometimes fails, because there is no ROM in IC socket U28. |
IBM 5160 64-256KB |
4.5 |
Works |
modem7 |
|
IBM 5160 256-640KB |
4.5 |
Works |
modem7 |
|
DTK PIM-TB10-Z (rev 9) |
4.5 |
Works |
modem7 |
1. Tested at 4.77 MHz
2. The five 'Check ROM at Fx000' tests fail because the spare ROM socket is unpopulated. |
BITCOM 640KB TURBO SYSTEM BOARD |
4.7 |
Works |
modem7 |
1. Tested at 4.77 MHz
2. The five 'Check ROM at Fx000' tests fail because the spare ROM sockets are unpopulated. |
Eagle 1600 |
? |
Mostly |
SomeGuy |
See post #23 at here. |
Amstrad PC1640 |
4.5 |
Mostly |
Malc |
The 'Keyboard stuck key' test does not work as intended. See note 1 below. |
[ this Juko motherboard ] |
4.7 |
Mostly |
modem7 |
1. Tested at 4.77 MHz (i.e. no CN8 jumper).
2. The 'Checking interrupt IRQ0' test fails. See note 2 below.
3. The five 'Check ROM at Fx000' tests fail because the spare ROM socket is unpopulated. |
Bi-017A TURBO-XT M/B VI |
4.7 |
Fails |
modem7 |
1. Tested at 4.77 MHz
2. Executes slowly.
3. The diagnostic restarts half way through the 'Testing RAM - Slow Refresh' test. See note 2 below. |